Laser Air Assist Pump - 50L/min
- Wide Adaptation
- Multiple Output Options 50L/min
- Enlarged Fan for Full Heat Dissipation
Laser Air Assist Pump - 50L/min
- Significant and consistent winds with a steady output power of 50L/min could efficiently clear smoke and guarantee the stability of laser energy.
- The air assist measures 5.9" x 5.7" x 3.5" inches.
- Equipped with an air-assist device on the laser engraving machine, it can blow away the smoke and debris produced during the working process of the laser engraving machine, helping the engraving machine to cut faster and deeper, and improving the laser efficiency.
- The Air Assist utilizes air to quickly reduce the temperature of the cut material surface, preventing deformation and discoloration due to high temperatures and ensuring smooth lines, intact patterns, and clean material surfaces.
- Air-assist could blow away the debris and smoke generated during the laser head's working process, protecting the laser head's lens from contamination and extending the laser head's service life.
- This product is suitable for most diode laser engraving machines on the market.
How to store laser materials correctly?
The panels should be stored horizontally and flat.
The storage location should be dry and weatherproof (indoor).
Average-temperature rooms without large fluctuations in room temperature and air humidity.
The material should not be exposed to direct sunlight, as the protective film can become porous if too much heat is generated.
Too long storage can have a negative effect on the protective film.
How do I reduce the dust generated during engraving or cutting?
It is recommended to set the parameters to engrave effectively through the color surface while only as little as possible is removed from the core material. Also, using a vacuum table and exhaust system to remove the dust generated effectively.